What are the maintenance methods of solar street lights

The life span of solar lamps is much higher than that of ordinary electric lamps. For example, the main part of solar lamps ---- the life span of solar cell components is 25 years; the average life of low-pressure sodium lamps is 18,000 hours; the average of low-voltage high-efficiency tri-color energy-saving lamps 6000 hours of life; the average life of ultra-bright LEDs is more than 50000 hours; the life of solar batteries is 2-5 years below 38AH; 3-7 years from 38-150AH. The product has high technology content, the control system and accessories are international brands, intelligent design, and reliable quality. According to the regulations of the conventional community, according to the local price bureau's "one-time charge of 6 yuan per square meter for street lamp maintenance fee based on pure residential building area", the initial investment of ordinary lamps is much higher than that of solar lamps. In short, the characteristics of saving investment in solar lamps are quite obvious from a comprehensive comparison.

Characteristics of solar street lights :

1. The service life is super long, under normal circumstances the service life is five to ten years.

2. Adopt suitable positive and negative electrode alloy formulations and active material ratio to make the battery more suitable for the use characteristics of energy storage battery cycle charge and discharge.

3. The design of the colloidal electrolyte effectively suppresses the derusting of the active material and the sulfation of the polar plate, thereby delaying the decline of the performance of the battery during use. Greatly improve the battery's deep charge and discharge cycle life.

4. The LED light source of the fourth generation of lighting products is selected for higher light efficiency and more energy saving.

Solar street lights should also pay attention to maintenance and repair, what are the maintenance methods:

1. The battery problem. If the lighting time is short and the battery energy storage drops, the battery should be replaced;

2. LED light source problem. The solar street lamp lamp beads are not completely bright. In addition to the quality problems of the LED light source itself, it is the welding problem. The lamp beads that cannot be replaced should be replaced in time or the lamp beads should be welded firmly or the lamp head should be replaced directly;

3. In places where solar street lights are installed, there is insufficient sunlight, and it is also a major problem that the batteries cannot be stored. The solar street light system suitable for this kind of place should be found to meet the lighting needs.

4. Poor line connection, battery feeding, and decreased energy storage will cause the lights to flicker. The place with poor line contact should be replaced or repaired in time.

5. The whole light is off. First, check whether the controller has entered the water. If it is not the problem of the controller, you are testing whether the battery has a voltage and whether the voltage is lower than 10.8V. If not, then check whether there is voltage on the battery board. Change the battery board without voltage.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349