Illuminating the Future: Explosion-Proof LED Street Lights

LED explosion-proof street light, the highest explosion-proof explosion-proof grade, can be safely used in a variety of flammable and explosive places. Heavy-duty companies for dangerous production, built street lights, and explosion-proof lights are designed for petrochemical, chemical, and petroleum sites.

Application scope:

1. Applicable to oil, oil refining, chemical, military and other dangerous environments and offshore oil platforms, oil tankers and other places for general lighting and work lighting 2. Suitable for places with high protection requirements and moisture
Product specification:

With light source: LED

Rated power: 50W, 60W, 80W, 100W, 120W, 140W

Explosion-proof mark: ExdIICT6

Rated voltage: AC220V (can be customized according to the user)

Protection class: IP66

Anti-corrosion level: WF2

Introduction device: G3/4 introduction port specification, cable diameter 10MM~14MM

Installation: Ceiling (X), Boom (G), Wall Mount (30 degrees B1), Wall Mount (90 degrees B2), Fence (F), Fence (h)

High-efficiency and energy-saving LED is the light source with the highest luminous efficiency so far. The same illuminance can save 50%-70% compared with traditional light sources. That is to say, using lower-power LED lamps instead of higher-power traditional lamps can achieve the same lighting effect. The best choice for energy saving and emission reduction;

Ultra-long life LED is a solid-state light source, no filament fuse, electrode aging and other defects, the average life of more than 50,000 hours, is the longest life light source so far, can be used for long-term maintenance-free use;

Safe and reliable LED adopts DC low voltage power supply, which is much lower in heat than traditional electric light source, and does not generate high-frequency electromagnetic fields. It does not cause electromagnetic interference to peripheral equipment. The LED is solid-state encapsulated with epoxy resin and is resistant to impact, vibration and crushing.

The emission spectrum of the green LED is completely in the visible light band, there is no ultraviolet radiation, no mercury, no heavy metal pollution; no environmental hazards such as filament melting, glass breakage, flammability and leakage of toxic substances.

1. Because most of the explosion-proof street lights are installed outdoors, it is very important when choosing explosion-proof street lamps. First of all, explosion-proof lamp heads and explosion-proof electrical boxes must reach the explosion-proof level.

2. The degree of protection must be more than (IP)54, and the level of corrosion protection (WF) must be above Class 1 and insulation must be Class 1.

3, the last need to lead a ground wire to the ballast outside the ground terminal.

4, the use of metal halide lamps and sodium lamps with explosion-proof lights when the scope of use, the general metal halide lamp light is white light more used in the area of less fog, and the high pressure sodium lamp light is yellow light used for foggy urban areas, yellow Light has a stronger penetration of fog.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349