LED light bar application range and installation method

April 02, 2023

Scope of application:

LED strips and LED strips are now widely used in furniture, automotive, advertising, lighting, shipbuilding and other industries.

installation method:

1 four-wire light bar is about 22mm wide, about 8mm thick, and weighs about 0.25kg/m (4m/kg)

2 four-wire light bar has four wires, three rows of lights (note that it is not four rows of lights ~ ~), each row of 1 meter 24 lights, 24 * 3 = 72. Since the power of each lamp bead is 0.05W, the power of the 72 bead bar is: 72*0.05=3.6W.

3 There is a "scissor" mark per meter, which can only be cut at the mark. If the mark is cut or cut, it will cause one meter to be off! Some will be biased because of the mark. It is best to look at the mark carefully before cutting. Position, cut off where there is no connection in the middle. Look carefully and you can see it.

4 Each light bar must be equipped with a special plug (plug with transformer); when connecting, be sure to remove the transparent plastic cover, then connect the test light and then cover. Do not connect directly with the cover, so it is easy to short circuit!

When the 5 light bar is installed, it is usually placed in the lamp socket, and it can be straightened. It can also be fixed with a string or a thin wire. For exterior or vertical installation, you need to buy a clip and a tail plug. The original clip is completely transparent. It is best to put waterproof glass glue on the tail plug and plug after installation, so that the waterproof performance is better.

If you need to purchase lamps in bulk, please contact us.WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349

Nous contacter

Author:

Ms. Mandy

E-mail:

mandy@wosenled.com

Phone/WhatsApp:

+8613425434349