Sharp new LED light power module supports AC drive (Figure)

LED light power module

Sharp has developed an LED light power module that supports existing dimmers. Directly using AC drive. By embedding the self-developed control circuit, the LED lamp can be adjusted without changing the existing dimmer. The ordinary dimmer is to adjust the brightness of the incandescent lamp, etc., and the electric power is controlled, and the existing LED power supply module that converts the alternating current into the direct current cannot fully drive the LED lamp due to insufficient power. This product is suitable for lighting in European and American stores and ordinary family living rooms.

The external dimensions have been reduced to 41mm28.7mm11.4mm by using self-developed thermal packaging technology. The input voltage is equipped with AC 100V and 220V products, and the output power is 3W and 8W respectively.

The sample price is 1,000 yen. For the sample delivery date, the 100V product was December 4, 2008, and the 220V product was December 17, 2008. In terms of mass production date, the 100V product was January 30, 2009, and the 220V product was February 27, 2009. The planned monthly production of 4 products totals 35,000.

Blog essays and light peers, witnessed 30 years 2008-12-02
LED industry: demand is optimistic but will not be in short supply 2008-12-02
Analysis: The impact of the central bank's interest rate cut on the LED industry? 2008-12-02
Beijing eliminated all low-efficiency lighting products in 20092008-12-02



1